Need help?Do you have a question about the Primedic HeartSave and is the answer not in the manual?
General| Weight | 2.2 kg (including battery) |
|---|---|
| IP Rating | IP55 |
| Device Type | AED (Automated External Defibrillator) |
| Waveform | Biphasic truncated exponential |
| Battery Type | LiMnO2 battery |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| ECG Analysis | Yes |
| Voice Prompts | Yes |
| Visual Indicators | Yes |
| Data Recording | Yes |
| Data Transfer | USB |
| Relative Humidity | 5% to 95% (non-condensing) |
| Charge Time | Less than 5 seconds |
Introduction to the safe use of the trainer and its purpose for educational purposes.
States that descriptions refer to the PRIMEDIC Heart Save AED Trainer made by METRAX GmbH.
Specifies that the trainer may only be used as described in the operating instructions.
Details the warranty period (24 months) and general provisions.
Lists reasons for exclusion of liability claims for damages to people or property.
Identifies physical components of the device with front and rear views.
Details specific components and controls visible on the bottom and front of the device.
Details the components and functions of the remote control and the SavePads Trainer.
Details and images of the PRIMEDIC SavePads Trainer electrodes.
Details and images of the trainer cable connecting electrodes to the device.
Lists additional accessories included with the PRIMEDIC Heart AED trainer.
Guide on checking packaging, device for damage, and confirming delivery contents.
Instructions for inserting or replacing batteries in the device's power module.
Step-by-step guide on how to insert the power module into the device.
Step-by-step guide on how to remove the power module from the device.
Instructions for inserting or replacing the SD card in the device.
Procedure for entering the device code for the remote control's operation.
Instructions on how to turn the HeartSave AED Trainer on and off.
Introduces the various pre-programmed resuscitation scenarios available for training.
Lists and describes the different pre-programmed resuscitation scenarios.
Provides details on scenarios, CPR cycles, and adjusting pediatric mode ratios.
Explains how to simulate electrode contact to start the analysis.
Details automatic analysis activation and adjusting the metronome volume.
Describes the device's voice prompts during adult mode and electrode application.
Details voice prompts when defibrillation is advised.
Details voice prompts when defibrillation is not advised.
Explains CPR cycles, compressions, and rescue breaths based on guidelines.
Describes the "Check electrodes" message and related prompts.
Provides instructions for cleaning the device and its accessories safely.
Outlines proper disposal methods for the device and electronic equipment.
Details battery requirements and the device's operating time.
Specifies the device's operating and storage environmental conditions.
Provides the physical dimensions and weight of the device.
Details the warranty period, coverage for defects, and claim procedures.
Lists warranty exclusions and procedures for returning the device for service.
Provides information about METRAX GmbH, its history, and product philosophy.
Lists representative offices in Shanghai, China and Moscow, Russia.
To Next Page
