5
Section 1: Getting Started
THANK YOU…
...for choosing Eddie the Edible Ink Printer. Eddie will print vibrant colors and stunning photo-
realistic photographs directly onto cookies and other approved print items.
This User's Manual is your complete step-by-step guide to quickly and easily setting up and
printing with your new Edible Ink Printer!
1A Choosing a Good Location
• Place the printer on a flat surface in a location with adequate air circulation to prevent
internal heat buildup.
• Do not place the printer near heat sources such as radiators or air ducts, or in a place
subject to direct sun light, excessive dust, mechanical vibration or shock.
• Allow for 3” of clearance behind the printer to accommodate cables.
• Allow for adequate overhead clearance for opening the top section to allow easy access
to the interior for cleaning. The printer will require 10” (25.4 cm) of additional space
above to completely open the top section (Total = 17" or 43.18 cm).
To Next Page
Loading...
