What to do if Primera trio Printer stops printing?
If your Primera Printer stops printing: 1. Check for a paper jam. Clear the jam and press the Retry button to resume. 2. Look for flashing lights. If the retry button is flashing, press it to retry the print. 3. Reset the printer by powering it off and then back on. Printing will resume if the print job is still in the queue.
How to fix paper jams in Primera Printer?
If paper becomes jammed in your Primera Printer, press the paper release button and gently pull the paper through the printer.
Why do lines appear in scans from my Primera trio Printer?
Lines appearing in scans from your Primera Printer usually indicate that a small piece of dust or dirt was caught in the scanner during the scan. Try the scan again. If the issue persists, you may need to perform a scanner cleaning procedure.
What to do if scanned documents are feeding crooked in Primera trio Printer?
To prevent scanned documents from feeding crooked in your Primera Printer, ensure you are feeding the documents into the scanner so the right edge is just touching the right side of the scanner slot.
How to access and configure printer settings within the Primera Trio application.
Details on adjusting print quality, paper size, color matching, and other preferences.
How to access and configure scanner settings, including presets and calibration.
Procedure for cleaning and calibrating the scanner to ensure optimal scan quality.
Procedure for cleaning the ink cartridge nozzles to resolve print quality issues.
Guidance on resolving common issues like scan lines, paper jams, and printer errors.
To Next Page
General
