Primera trio - Section 8: Battery Installation and Use

Section8:BatteryInstallationandUse

Theoptionallithium‐ionbatterycanbeinstalledtoprintorscanwithouttheACpoweradapter
connected.Onceinstall edthebatteryisautomaticallyused anytimetheACpo wercableis
disconnected.
Page|45






InstallationInstructions
1.Findthebattery:

2.DisconnectACpowerandUSB.

3.LocatetheBatteryCoverreleaselatchontherightsidenearthepaperinfeedarea.


Thebatteryautomaticallychargesanytimetheprinteris
connectedtoACpowerorconnectedtoapoweredUSBcable.

ChargeTimeACPower=1hour45minutes
ChargeTimeUSB(PrinterOff)=10hours30minutes
ChargingtheBattery
UseonlyPrimera
BatteryPart#31033