Primera trio - 5 C. Printer Settings (Calibrate, Clean, Change & Stow)

5C.PrinterSettings(Calibrate,Clean,Change&Stow)

ToaccessprintersettingsclickonthegeariconatthetopofthePrimeraTrioapplication.

Page|19




ThePrinterSettingswindowwillopen.Clickthebackbuttontogoback.


Showprintsettingbeforeprinting.Checkthisboxtomaketheprintingpreferenceswindowappear
beforeprinting.Mostprogramsalreadyallowthisfunctionality.Thisisonlynecessaryifyo uwould like
toprintdirectlyfromthePrimeraTrioApplicationandyouwouldliketoprintmultiplecopies.
Fittoprintablearea/Keeporiginalsize.Setthissetting to“Keeporiginalsize”unlessyouareprintinga
fullsize(8.5”x11”)documentthathasamargin lessthan¼inch(6.35mm).Ifthis is thecase,select“Fit
toprintablearea.”
