Need help?Do you have a question about the Primera LX2000 and is the answer not in the manual?
General| Brand | Primera |
|---|---|
| Model | LX2000 |
| Category | Label printer |
| Language | English |
Select an optimal location for the printer, considering ventilation and clearance for operation.
Verify all accessories are present and check the printer for any shipping damage.
Familiarize yourself with the control panel, cover, and internal printer components.
Learn about label dimensions, material compatibility, and sensing methods (Gap, Thru-Hole, Reflective).
Step-by-step guide on how to properly load label stock into the LX2000 printer.
Fine-tune the sensor position to ensure accurate label detection for various media types.
Select the appropriate sensor mode (Die Cut, Reflective, Continuous) for your label stock.
Define how labels are presented or cut after printing, including cutter options.
Monitor the remaining ink levels for each cartridge via the Status Monitor software.
Check the remaining life of the print head to anticipate replacement needs.
Utilize the cost estimator to calculate the expense per printed label.
Learn how to replace ink cartridges and respond to low ink warnings.
Run an alignment print to ensure optimal print quality and accuracy.
Guide to using the included BarTender software for creating and printing labels.
Add text, barcodes, and graphics to your label designs using BarTender tools.
Steps to print your designed labels using the BarTender application.
Adjust print position for accurate placement on labels, including Left Margin Offset.
Learn how to set up the printer for full bleed printing, extending ink to the label edge.
Customize driver settings for orientation, media type, and print quality.
Troubleshoot vertical and horizontal print offsets and sensor detection problems.
Diagnose and fix common print quality problems like poor resolution or color issues.
Tips for accurate color reproduction and effective label design for quality output.
Create and save log files for technical support assistance.
Instructions for cleaning the printer's interior and replacing the ink pad tray.
Procedures to clean clogged print head nozzles for improved print quality.
Step-by-step guide for safely removing and installing a new print head.
Explanation of button functions and LED status lights on the printer.
Information on how to get help from Primera's technical support resources.
To Next Page
