Section 1
Product Introduction
Specification
The CUT60 is made by international most advantaged invert technology. 50/60Hz
frequency is inverted to high frequency (frequency is over 100KHz) by V-MOSFET,
then reduce voltage and commute current, inverter power supply generates
powerful DC welding current through PWM technology. Because inverter
technology of switch power is used, volume and weight of main transformer has
reduced substantially and efficiency has been increased by 30%.
The CUT60 is a non-high frequency start machine. The "blow-back" type start that
is used is generally safe for use in CNC applications and is ideal for general use.
Blow-back type start involves a rearward movement of the electrode within the
torch head when forced by the air pressure. When air pressure is applied the
movement of the electrode off its seated position against the inner surface of the
circuit grounded nozzle creates a spark, energizing the plasma stream. With this
machine's start type and pilot arc design, you are able to cut on any metal surface
without having to contact to strike an arc which is ideal for cutting items like
expanded metal or uneven surfaces. This Cutting machine has a wide range of
uses which is suitable for cutting: stainless steel, alloy steel, mild steel, copper and
other color metal materials.
Cutting machine has characteristics as following:
2.
3.
4.
5.
6.
Stabilizing.
Reliability.
Lightness.
Energy-saving and no noise.
High cutting speed.
Cutting smoothly and no polish demands.
Thanks for purchasing Primeweld products and looking forward to your precious
advice. We will be dedicated to provide our best products and service.
PRIME-WELD CUT 60 User Mannual
10
To Next Page
Loading...
