Section 1
DANGER
Specification
Please follow the rules below to avoid heavy accidents.
Never use the equipment to do other things but welding.
Follow related regulations for the construction of the input-driven power
source, choice of place, usage of high-pressure gas, storage, configuration, safe-
keeping of workpiece after welding and disposal of waste, etc.
Nonessentials do not enter the welding area.
People using heart pacemaker is not allowed to get close to the welding
machine or area.
Without doctor's permission, the magnetism created by energizing the welding
machine can have a bad effect to the pacemaker.
Install, operation, check and maintain the equipment by profession personnel.
Understanding the contents of the user manual for safety.
Please follow the rules below to avoid electric shock.
DANGER
Keep away from any electric parts.
Earth the machine and workpiece by professional personnel.
Cut off the power before installation or checking, and restart 5 minutes later.
The capacitance is chargeable device. Please ensure it has no voltage before
start again even if the power source is cut off.
Do not use wire with inadequate section surface or damage insulation sleeve or
even exposed conductor.
Do ensure well isolation of wire connection.
Never use the device when the enclosure is removed.
Never use broken or wet insulation gloves.
Use firenet when work at high position.
• Check and maintain regularly, don't use it until the broken parts are fixed well.
Turn off the power when not in used.
Follow the national or local related standard and regulations when using the AC
welding machine at narrow or high position.
PRIME-WELD CUT 60 User Mannual
5
To Next Page
Loading...
