Section 1
Specification
Please follow the below notes to avoid fire and explode, etc.
DANGER
No combustible in welding area.
Keep off combustible when welding.
Keep hot workpiece after welding away from flammable gas.
Do move away the combustible around when weld the dooryard, ground and wall.
The wire connection of base metal should be as close to the welding place as
possible.
Never weld those facilities with gas pipe or airtight slot.
Put fire extinguisher around the welding area to prevent fire.
The gas and fumes are harmful to health, please wear
protective device according to regulations.
DANGER
Wear exhaust equipment and breathe preventive facilities to prevent gas
poisoning or choke.
Use suggested part exhaust equipment and breathe preventive facilities to
prevent hurt or poisoning by gas and other powder, please.
To prevent oxygen-deficiency, air out the gas-filled room which is full of C02
and argon on the bottom, When operating on trunks, boilers, cabins, etc.
Please accept the supervisor's inspection when operating in narrow space. Air
the room and wear breathe preventive facilities.
Never operate in degrease, washing or spray space.
Using breathe preventive facilities when weld shielded steel for it will cause
poisonous dust and gas.
PRIME-WELD CUT 60 User Mannual
6
To Next Page
Loading...
