EasyManua.ls Logo

PrimeWeld CUT60 - Cylinder, Switch, and Wire Safety

PrimeWeld CUT60
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 1
Specification
The arc, spark, residue and noise are harmful to health,
please wear protective appliance.
WARNING
Eye protection against arc is recommended when welding or supervise welding.
Please wear preventive spectacles.
Weldeffsgloves, weldeds goggles,long sleeve clothes, leather apron, and other standard
protection equipments must be worn for welding operation.
A screen to protect other people against the arc must be set in the welding place.
Please follow the notes below to avoid gas cylinder
toppling over or broken.
WARNING
Use the gas cylinder correctly.
Use the equipped or recommended gaseous regulator.
Read the manual of gaseous regulator carefully before using it, and pay
attention to the safety notes.
Fix the gas cylinder with appropriative holder and other relative parts.
Never put the cylinder under high temperature or sunshine environment.
Keep your face away from the gas cylinder exit when opening it.
Put on the gas shield when it is not used.
Never put the torch on the gas cylinder. The electrode can not meet the gas cylinder.
Any touch of the switch part will cause injury, please note
the following.
WARNING
Never use the machine when the enclosure is off.
Install, operate, check and maintain the machine by professional person.
Keep your fingers, hair, clothes etc. away from the switch parts such as the fan.
PRIME-WELD CUT 60 User Mannual
7

Related product manuals