Need help?Do you have a question about the Primus 7,5kg and is the answer not in the manual?
Read and follow all safety instructions to minimize risks of fire, injury, or property damage.
Follow manufacturer instructions for detergents and heed warnings for safe use and storage.
Critical safety measures for emergency stops, door operation, and child safety around the machine.
Follow instructions for safe transportation and storage to avoid component damage and ensure proper conditions.
Refer to the User's manual for machine symbols and their meanings.
Explanation of symbols indicating danger, high voltage, heat, and steam for safe operation.
Prepare laundry by assorting, emptying pockets, and loading correctly for optimal washing.
Load laundry into the drum according to maximum capacity, avoiding overload for proper function.
Choose wash programs based on garment quality and temperature, and understand detergent dispenser functions.
Steps to start the machine, monitor progress, and overview available washing programs.
Diagnose and resolve drain issues when water is not drained within 3 minutes.
Address out-of-balance errors detected before or during spin cycles due to improper loading.
Troubleshoot fill issues and heating problems where temperature does not rise correctly.
Resolve heating time failures, coin drop errors, and safety errors preventing door opening.
Instructions for safe handling, unpacking, removing transport bolts, and required clearances.
Guidance on locating the machine on a level floor and removing transporting braces.
Mandatory guidelines for electrical connection, emergency stop, and water supply hookups.
Instructions for water drain, air vent, and liquid soap connections, with safety warnings.
Essential checks before operation: removing braces, leveling, connections, and reading manual.
Routine checks for drum, seal, filters, contacts, and drain valve/pump functionality.
Procedure for adjusting door seal pressure and vibration switch position for optimal performance.
Steps to replace the door rubber seal, belt, and check fuses.
Procedure for opening the door during power failure or emergency situations, with safety warnings.
Guidance on interpreting error indications shown on the display, referring to other manuals.
List of recommended spare parts including drain valve, pump, inlet valves, fuses, sensors, and door seal.
Steps to safely disconnect the machine and guidelines for environmentally sound disposal.
To Next Page
General
