Primus IFF 50 - Original Factory Setting

PROGRAMMING MANUAL PUB. DATE 11/02 505 55612
4.2. ORIGINAL FACTORY SETTING
PARAMETER: DISPLAY:
1. Length of impulse
Pulse length:
........................................
2. Delay of clamps
Clamps delay:
........................................
3. Setting of 1. fold
Table distance:
........................................
4. Correction after measuring
the length
Length correct.:
........................................
5. Speed factor of the folding
table drive
Motor 2:
........................................
6. Type of heating
Heating system:
........................................
7. Reducing the back fold
Rear fold cor.:
........................................
8. Reducing the folds
Fold decrease:
........................................
9. Time period of the back
stroke
Reverse operation:
........................................
10. Speed of the cross folder
belts
Machine speed:
........................................
11. Time for evaluation of linen
„askew“
Max.askew ln.time:
........................................
12. Correction of measuring the
length by the cross folder
CF length corr.:
........................................
13. Distance for 2. fold
2nd cross fold:
........................................
14.
Distance for 3. fold 3rd cross fold:
........................................
15. Distance when doing 2 folds
2nd fold (2 only):
........................................
16.
Time of the stacker conveyer
running
Conveyor time:
........................................
Modem settings:
57600 / 8 / N / 1
SW:
..............................
PCCSW:
..............................