18 INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE 07/04 513289
WARNING !
THE TRANSPORT BRACES MUST BE REMOVED PRIOR PUTTING YOUR MACHINE INTO SERVICE.
OTHERWISE YOUR WASHING MACHINE CAN BE SERIOUSLY DAMAGED !
FOLLOWING ACTION MUST BE UNDERTAKEN:
1. A check of the transport braces removal.
2. Removal of the cabinet protective foil.
3. A check if the waste sump (or recycling tank) is ready for water drainage.
4. A check of the protective connection (earthing) - „PE“ or „PEN“.
5. A careful reading of the „User´s manual“ before the machine start and following the instructions stated.
6. A check of the proper vibration switch function during washing and extracting and the emergency (centralstop)
function.
7. Initialization for calibration of „zero“ level, according to instructions of the „Programming manual“ delivered
with the machine.
8. Check air pressure on a machine pressure gauge after the pressure air supply is connected.
The air pressure value must be in prescribed range.
9. Check the door opening and closing proper function. Do the same for the machines equipped with the
automatic door opening and closing function. Door opening and closing control – see „User´s manual“.
!
www.groupdynamics-laundry.com
sales@groupdynamics.lv
To Next Page
Loading...
