It is important that your appliance is installed and
operated in accordance with the manufacturer’s
instructions to guarantee the performance,
ef ciency and operation.
• Position the appliance in a safe and secure
location. Limit exposure to heat sources or direct
sunlight which can affect the unit’s performance
and ef ciency.
• The normal operation of the appliance requires
heat to be radiated away from the condenser
located in rear end of the cabinet. Adequate
air ow is required to be available around the
compressor at all times.
• The cooling system has been designed to operate
correctly when the appliance is positioned on
angles up to 35 degrees. It is recommended that
the time the unit is exposed to angles over 30
degrees is limited to a maximum of four (4) hours
continuous operation.
• Your appliance can be used as either a freezer
or a refrigerator; it cannot be used as both
simultaneously.
Installation and operation of your Fridge/Freezer
30°
To Next Page
Loading...
