The Prinetti Ceramic Tower Fan Heater (model IA1864A) is an indoor household appliance designed to provide heating. It features a sleek, black tower design with an LED touch screen control panel and comes with a remote control for convenient operation.
Function Description:
The primary function of this device is to heat a room using ceramic heating elements. It operates as a fan heater, circulating warm air. It offers two main heating modes: Low Heat (1000W) for slower heating and High Heat (2000W) for faster heating. In addition to heating, it can also operate in a "fan only" mode, where the fan activates without emitting heat. The heater includes an oscillation function (SWING mode) to help circulate heat evenly throughout the room. A timer function allows users to set the operating duration, and a temperature control feature enables adjustment of the desired room temperature.
Important Technical Specifications:
- Model: IA1864A
- Heating Modes: Low Heat (1000W), High Heat (2000W)
- Temperature Settings: Range from 18-45°C
- Timer Settings: Adjustable in 30-minute increments, from 0.5 hours (30 minutes) up to 7.5 hours (7 hours and 30 minutes)
- Power Source: Requires connection to a power outlet with corresponding voltage and circuit frequency as stated on the product rating label.
- Control: LED Touch Screen Control Panel on the unit, and a Remote Control.
- Remote Control Batteries: 2 x AAA batteries (user replaceable).
Usage Features:
- Power On/Off: The unit has a main power switch at the back ("I" for ON) and a Power/Standby button on both the LED touch screen and the remote control.
- Mode Selection: The "MODE" button allows selection between fan-only mode, Low Heat, and High Heat modes.
- Oscillation (SWING): The "SWING" button activates or deactivates the side-to-side oscillation for wider heat distribution.
- Timer Function: The "TIMER" button sets the operating time in 30-minute intervals.
- Temperature Control: The "Temperature Control" button on the unit or the "Temperature Increase/Decrease" buttons on the remote allow setting the desired room temperature.
- Remote Control: Provides full control over all functions from a distance, including a "CANCEL" button to exit temperature setting modes. The remote requires line of sight to the remote sensing window on the LED touch screen.
- Cool-down Function: After switching off the heat, the fan continues to operate until the Tower Heater has cooled down to room temperature.
- Safety Features:
- Safety Thermal Cut-Out: Automatically shuts off the heater in case of overheating. The unit needs to cool down for about 10 minutes before restarting.
- Tip-Over Switch: Automatically switches off the heater if it is knocked over. It is recommended to manually switch off the appliance before standing it upright again.
- Indoor Household Use: Intended for indoor household use only, not for commercial purposes.
- Placement: Must be operated on a dry, level surface, away from combustible materials, hot surfaces, baths, showers, or swimming pools.
- Obstruction Warning: Never block or cover the openings of the Tower Heater during use to prevent fire risk.
Maintenance Features:
- Cleaning:
- The exterior can be cleaned with a soft damp cloth, followed by thorough drying with a soft dry cloth.
- A vacuum cleaner with a soft brush attachment can be used to remove dust and dirt from air openings.
- CAUTION: Always unplug the Tower Heater before cleaning or assembling.
- WARNING: Do not use metal scouring pads, harsh, or abrasive cleaners, as these can damage the unit or create a risk of electric shock.
- WARNING: Never immerse the Tower Heater, cord, or plug in water or any liquid.
- Storage:
- Ensure the unit is clean and dry before storage.
- Recommended to store in its original carton to protect it from dust.
- Store in a clean, dry place, out of children's reach.
- Do not place heavy objects on top of the unit during storage.
- Cord Maintenance:
- Keep the cord away from heated surfaces, sharp edges, or corners.
- Do not bend or damage the cord.
- If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
- User Serviceability: The unit has no user-serviceable parts. Do not attempt to repair, disassemble, or modify the Tower Fan. Contact the After Sales Support Line for advice if the product is damaged.
Need help?
To Next Page
General