EasyManua.ls Logo

Prinetti IA1864A - Getting Started; Before First Use Procedures

Prinetti IA1864A
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
08
AFTER SALES SUPPORT AU
1300 777 137 NZ
0800 824 556 service@unclebills.com.au
Before First Use
Please ensure you follow the steps below before using this appliance. We recommend
you keep the original packaging for storing your Tower Heater when not in use.
1. Unpack the product but keep all packaging material until you have made
sure your new Tower Heater is undamaged and in good working order. Plastic
wrapping can be a suffocation hazard for babies and young children so ensure
all packaging material are out of their reach.
2. Remove the twist-tie which is securing the electrical cord. Uncoil the cord and
straighten it to remove any kinks. Do not use the product if these parts are
damaged. In case of damage, phone the After Sales Support Line on 1300 777 137.
CAUTION: Do not touch hot surfaces. The temperature of the outer body can get
very hot while the Tower Heater is in operation. Allow the unit to cool down completely
before cleaning or packing the unit away for storage.
NOTE: You may notice a slight odour being emitted from the Tower Heater during the
initial use. This is normal and odour will cease with continued use.
Getting Started