Printek FieldPro 541 User Manual

© 2017 Printek LLC 3515 Lakeshore Drive, St. Joseph, MI 49085 PH:269-925-3200
www.printek.com | E: info@printek.com
NOTE:
When using
3” paper,
install spacer
P/N: 93194
Printer features
Media Battery
FieldPro 541
Quick Start Guide
This guide provides information on the daily use of the FP-541 printer.
For additional information, please refer to the FP-541 User Guide.
Press button to see
battery charge level.
4LED 100% charge
3LED 75%
2LED 50%
1LED 25%
Loosen hand strap
(not pictured) to
access battery
door.
Rotate knob 180
o
to unlock battery
door.
Drop in battery.
Close battery door
and rotate knob
180
o
to lock.
Press Paper door release button to
open the paper compartment door.
Pull small leader of paper out and
close paper door. “ Clicks” when
properly closed.
Battery Disposal
Only dispose of used batteries according to your local regulations. If
you do not know your local regulations, the Rechargeable Battery
Recycling Corporation (RBRC) is a non-profit organization created to
promote recycling of rechargeable batteries. For more information
visit www.call2recycle.org
Paper door release button
USB Data Port
Power Port
Control Panel
Paper Door
Tear paper
towards back of
printer

Printek FieldPro 541 Specifications

General

Print Technology	Direct Thermal
Print Resolution	203 dpi
Print Speed	Up to 5 ips
Paper Handling	Tear bar
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Connectivity	USB, Bluetooth
Media Type	Labels, Tags
Media Width	4.25 inches
Weight	2.0 lbs with battery
Maximum Print Width	4.1 inches