Printrbot Play 1505 - User Manual

Assembling the Printrbot Play Kit (Model
1505)
Written By: Printrbot Support
TOOLS:
#1 Phillips Head Screwdriver (1)
Zip tie gun (1)
Blue Threadlocker (1)
Micro Cutters (1)
Needle nosed pliers (1)
Rubber Mallet (1)
Assembling the Printrbot Play Kit (Model 1505)
© 2015 help.printrbot.com Page 1 of 29

Printrbot Play 1505 Specifications

General

Layer Resolution	100 microns
Print Speed	80 mm/s
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Connectivity	USB
Supported Materials	PLA
Heated Bed	No
Build Volume	100 x 100 x 130 mm
Software	Cura, Repetier Host