999016 – Revision G P a g e | 16 of 44
To remove the sling, simply reverse the process – pull back on the spring locking mechanism, lift the loop out of the hook and
release the locking mechanism.
The slings attach to the black and white carry bar in the same fashion as described above, see images below for reference.
We recommend the use of Prism manufactured sling range (type ‘BF’ applied part) to be utilised with the CP Hoist. It is at the
user’s discretion to use alternative supplied product. In utilising another manufacturer’s sling, checks must first be made to
ensure the sling is safe to use and meets the requirements of BS EN ISO 10535 before its use and a full risk assessment to be
carry out before use.
The Mackworth slings with a safe working load of 200kg or more that can be used with the CP Hoist are shown below in Table 5,
complete with product codes.
To Next Page
Loading...