Prism CP - Symbols Used

999016 – Revision G P a g e | 6 of 44
1.4 Symbols Used
The table below includes all symbols from BS EN ISO 15223-1:2016 that can be found in this manual and on the product and
what they represent. Refer back to this table when you are unsure of what a symbol represents.
Consult instructions before use
Caution – see instructions for use
Class II Equipment - electrical
equipment in which protection against
electric shock does not rely on basic
insulation only
Safe Working Load represents the
maximum load rated for safe operation
Manufacturer
Date of manufacture
Packaging indicator – This way up
Packaging indicator – Keep dry
Serial number
For internal use only
Please observe local laws on recycling
Degree of protection provided by
enclosure.
N
1
: Ingress of particles
N
2
: Ingress of water
Temperature range
Humidity range
Atmospheric pressure range
Type ‘B’ applied part
Catalogue number
Type ‘BF’ applied part
UK CA
European Authorised Representative
Table 2