Priva COMPACT BP-811 - Monitor Set-Up; Inserting the Batteries; User Selection; Setting the Time and Date

2. MONITOR SET-UP
2.1. Inserting the Batteries
After you have unpacked your device, rst insert batteries.
• Remove battery cover located on the bottom of the monitor.
• Insert batteries (4× 1.5V AAA), observing the indicated
polarity.
2.2. User Selection
This advanced blood pressure monitor allows you to track blood
pressure readings for 2 individuals, independently.
Before each blood pressure measurement, select the intended
user (User 1 or User 2), as follows:
• Press and hold the “TIME” button down for at least 3 seconds.
The set user will ash for conrmation.
• Press the “MEMORY” button to change the selected user and/
or the “TIME” button to conrm.
2.3. Setting the Time and Date
If the date and/or time is incorrect, press and hold the “TIME”
button down for at least 3 seconds.
Once the user is selected, you will enter the DATE and TIME
selection mode. The year will start ashing.
To change, press the “MEMORY” button and/or the “TIME” button
to conrm.
Continue with this process until the YEAR, MONTH, DAY, HOUR
and MINUTES are selected.
3