Priva FS Concentrator - Taking out of Operation

Priva B.V.
20 FS Concentrator – installation manual – 1.2
Taking out of operation
If the FS Concentrator must be replaced by another one, first add the new FS
Concentrator before removing the old one! (Else all FS Readers must be rebooted to
connect to a new network.)
The following steps must be taken to remove the FS Concentrator from the system:
1. The steps required to remove the FS Concentrator from the labour registration system
are described in the “FS Reader Software – User Manual”.
2. The installer disconnects the Ethernet cable.
3. The installer disconnects the power cord.
4. The unit is now ready to be shipped for repair or decommissioning.