Start to use
Charge the built-in lithium battery
The camera is equipped with built-in 3.7V lithium battery. Please ensure power available
for the camera and timely charge it in case of low battery.
The
charging indicator will be on when charging, and will be off when the battery is fully
charged. Generally, the battery can be fully charged after about 4 hours.
Note: when the DV is on, it will not charge until the DV turn off.
How to use the memory card
Properly insert the
MicroSD card into the card holder as per the instructions indicated
near the card holder.
To remove the
MicroSD card, press the end of memory card gently, the card will be
ejected.
Startup and shutdown
Startup: press the POWER key for 3 second, the camera will show startup screen
and enters into POWER ON state;
Shutdown: press the POWER key for 3 second when the camera is under idle mode
to shut down;
Auto shutdown: the camera will be shut down automatically when the camera is
under idle mode for a certain time to save power. The default time for auto shutdown is 3
min.
Shutdown under low power: when the battery is under low power, the LCD will
indicate
the camera will be shutdown automatically.
Function modes switching
The camera has 4 modes: recording mode, photo mode, movement mode and playback
Note: The camera is not equipped with built-in
memory. Please insert memory card before
using. Before using the camera, it is a must to
format the memory card on the camera.
mode. Press the Mode key to switch the modes after starting up.
To Next Page
Loading...
