Need help?Do you have a question about the Pro 1 IAQ T721 and is the answer not in the manual?
General| Power Source | Battery |
|---|---|
| Programmability | 7-Day Programmable |
| Display | Backlit |
| IAQ | Yes |
| Compatibility | Conventional and Heat Pump Systems |
| Connectivity | Wi-Fi |
| Operating Temperature | 32°F (0°C) |
| Humidity Control | Yes |
| Remote Access | Yes |
Guidance on selecting optimal and suboptimal wall locations for thermostat installation.
Overview of the thermostat's LCD display, buttons, and key features.
Instructions on how to safely remove the thermostat's private label badge.
Guidelines for powering the unit and selecting changeover valve terminals.
Safety warnings for installation and compliance with Class II circuits.
Explanation of terminal functions on the thermostat.
Instructions for setting the temperature display to Fahrenheit or Celsius.
Instructions for setting the thermostat to 12-hour or 24-hour time format.
Configuration of the filter change reminder feature.
Adjusting the thermostat's room temperature display calibration.
Setting the minimum run time for the compressor to prevent short cycling.
Enabling a delay to prevent compressor short cycling.
Adjusting the cooling differential or cycle rate.
Adjusting the heating differential or cycle rate.
Enabling gas auxiliary heat for dual fuel applications.
Keeping multiple stages energized until setpoint is satisfied.
Setting a delay for second and third stage activation.
To Next Page
