Pro 1 IAQ T955 User Manual

This manual covers the following models:
• T955
INSTALLATION MANUAL
A trained, experienced technician
must install this product.
Carefully read these instructions. You
could damage this product or cause a
hazardous condition if you fail to follow
these instructions.
Need Help?
For assistance with this product please
visit http://www.pro1iaq.com or call Pro1
Customer Care toll-free at 888-Pro1iaq
(776-1427) during normal business hours
(Mon-Fri 9 AM - 6 PM Eastern)
Table of Contents
Thermostat Applications Guide
Page
Battery Power
Hardwire (Common Wire)
Hardwire (Common Wire) with Battery Backup
Power Type
1
noitpircseD
Gas or Oil Heat
Electric Furnace
Heat Pump (No Aux. or Emergency Heat)
Heat Pump (with Aux. or Emergency Heat)
Multi-stage Systems
Heat Only Systems
Heat Only Systems
Cool Only Systems
Millivolt
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Rev. 1026
Una versión española de este
manual puede ser descargada
en www.pro1iaq.com
® U.S. Registered Trademark. Patents pending.
Copyright © 2010 Pro1 IAQ, Inc. All rights reserved.
Installation Tips
Thermostat Quick Reference
Subbase Installation
Wiring
Technician Setup Menu
Mounting and Battery Installation
Programming The Thermostat
Specifications
2
3
4
5
6-8
9
10-12
13

Pro 1 IAQ T955 Specifications

General

Indoor Air Quality Monitoring	Yes
Color	White
Power Source	Battery
Programmability	7-Day Programmable
Display	Color Touchscreen
Features	Geofencing
Connectivity	Wi-Fi
Remote Control	Yes, via App
Energy Saving Features	Energy Reports

Summary

Installation Manual Overview

Important Installation Safety

Highlights critical safety warnings and the need for professional installation.

Thermostat Installation Tips

Installation Site Restrictions

Lists locations where the thermostat should not be installed to ensure accurate readings.

Subbase Installation Procedures

Electrical Hazard Warning

Critical safety notice regarding disconnecting power before installation.

Thermostat Wiring Guide

Wiring Safety Warnings

Advises on conforming all wiring to NEC Class II circuits and proper wire handling.

Terminal Designations Explained

Technician Setup Menu - Part 1

Accessing the Setup Menu

Setup Options: Filter, Calibration, Compressor, Swing, Lockout

Details on configuring filter reminders, temperature calibration, compressor settings, swing, and keypad lockout.

Technician Setup Menu - Part 2

Setup Options: Setpoint Limits, Clock, Recovery, Program, Light

Configuration for temperature limits, clock format, morning recovery, program type, and display light.

Heating Stage Operation Explanation

Technician Setup Menu - Part 3

Setup Options: Contractor, Beep, Heat Pump, Fan, Gas Aux, Cooling Delay, Stages

Configuration for contractor number, audible beep, heat pump, fan operation, gas auxiliary, cooling fan delay, and heat stages.

Mounting and Battery Installation

Thermostat Mounting Procedure

Battery Installation Procedure

Thermostat Programming - Part 1

Setting the Current Time

Default Program Schedule Overview

Thermostat Programming - Part 2

Customizing the 5+1+1 Program Schedule

Instructions for setting up a personalized 5+1+1 program schedule for weekdays, Saturday, and Sunday.

Thermostat Programming - Part 3

Customizing the 7-Day Program Schedule

Instructions for setting up a personalized 7-day program schedule, day by day.