pro.point 8656852 - Specifications

8656852 10 IN. HEAVY-DUTY BENCH GRINDER V1.0
2 For technical questions call 1-800-665-8685
SPECIFICATIONS
Horsepower
1-1/2 HP
Wheel Size
10 in.
Arbor Size
1 in.
No Load Speed
1,725 RPM
Voltage Rating
115V / 230V dual voltage, prewired to 115V
Current Rating
12A@115V, 6A@230V
Frequency Rating
60 Hz
Grinding Wheels
Grit
36 and 60
Dimensions
10 in. Diameter by 1 in. Thick
Bore
1 in.
INTRODUCTION
The 10 in. Heavy-Duty Bench Grinder has a 1-1/2 HP output
motor for smooth performance. The removable grinding wheel
guards allow for easy wheel changes. The tool rests are
adjustable for angle grinding and wheel wear. Spark guards
and eyeshields are installed for safety. The heavy duty cast iron
base is pre-drilled to bolt the grinder to a workbench. A dust
collection hose is included.
SAFETY
WARNING! Read and understand all instructions before using
this tool. The operator must follow basic precautions to reduce
the risk of personal injury and/or damage to the equipment.
10 IN. HEAVY-DUTY
BENCH GRINDER