Pro's Kit MT-3209 - AC Voltage Specifications; LoZ V DC & AC Voltage Specifications; Frequency Measurement Specifications

5
 AC Voltage
Measurement range
Resolution
Accuracy
6V
0.001V
（1.0% reading +5 digits）
60V
0.01V
600V
0.1V
（1.2% reading +10 digits）
Input impedance: 10M
Maximum input voltage: 600V AC (valid value)
Frequency response: 40Hz-1kHz True-RMS
 LoZ V DC & AC Voltage
Measurement range
Resolution
Accuracy
DC 600V
0.1V
（2.0% reading +3 digits）
AC 600V
0.1V
（2.0% reading +3 digits）
Input impedance: 1M
Maximum input voltage: 600V DC or AC (valid value).
Frequency response: ACV 40Hz-1KHz; sine wave average response.
 Frequency
 Pass V Position:
Measurement range
Resolution
Accuracy
600Hz
1Hz
（1.5% reading + 5 digits）
6KHz
0.001KHz
60KHz
0.01KHz
600KHz
0.1KHz
Input signal range: 0.6V~600V
Overload protection: 600V DC or AC (valid value)
 Clamp Head Frequency Measurement (Pass A Position):
Measurement range
Resolution
Accuracy
600Hz
1Hz
（1.5% reading + 5 digits）
Input signal range: 6A~600A AC current (valid value)