Need help?Do you have a question about the Pro's Kit MT-4618 and is the answer not in the manual?
Specifies environmental conditions for meter operation: elevation, humidity, and temperature limits.
Guidelines for cleaning the meter and proper storage, including battery removal when idle.
Explains the meaning of safety symbols like dual protection and CE compliance.
Instructions for opening the battery cover and correctly installing AAA batteries.
Explanation of the low battery symbol and the requirement for prompt replacement.
How to power on, interpret range indicators, and adjust measurement levels for accuracy.
Guidance on selecting weighting modes (A/C) and response rates (FAST/SLOW).
How to capture maximum sound levels and utilize the LCD backlight.
General| Display Type | LCD |
|---|---|
| Diode Test | Yes |
| Continuity Buzzer | Yes |
| Data Hold | Yes |
| Auto Power Off | Yes |
| Continuity | Yes |
| Transistor Test | Yes |
| Category | Digital Multimeter |
| DC Current Range | 200μA/2000μA/20mA/200mA/10A |
| Resistance Range | 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ |
| Capacitance Range | 2nF/20nF/200nF/2μF/20μF |
| Frequency Range | 20kHz |
| Power Supply | 9V battery |
| DC Voltage Range | 200mV/2V/20V/200V/1000V |
To Next Page
