12
Operation:
1. Smoke absorber
With a low-noise and brushless DC motor, the smoke absorber has an air volume of 1.0m
3
/min. It can absorb
harmful smokes to protect the health of users. Its angle can be adjusted quickly and easily and be locked
firmly, which is completely safe and reliable during use.
• Press and hold the locking button at the right side and adjust the smoke absorber's angle. Then
release the button to lock it.
• Turn it on/off with its switch on the panel.
• When the activated carbon filter has become pale and hardened, it needs to be changed. Take
off the guard, change the filter and get the guard back in place.
2. LED light
• The LED light integrated on top of the smoke absorber is composed of 12 LEDs, which can
provide light for soldering with a life of more than 10000 hours.
• Press and hold the locking button at the right side and adjust the smoke absorber angle. Then
release the button to lock it.
• Turn it on/off with its switch on the panel.
• If the LED lighting is dazzling, slide down the shade.
11. USB port
The standard universal USB port has an output of 5V 1A. It can be used to supply power to maintenance
equipment or as a temporary power charger.
To Next Page
Loading...