Need help?Do you have a question about the Pro's Kit SS-989 and is the answer not in the manual?
General| Type | Hot Air Rework Station |
|---|---|
| Power Supply | AC |
| Power Consumption | 700W |
| Airflow | 120 L/min (max) |
| Display | Digital |
| Heater Material | Ceramic |
| Frequency | 50/60Hz |
| Input Voltage | 220V |
| Temperature Range | 100°C to 480°C |
| Nozzle Size | Ø 2.5mm, Ø 4.4mm |
Defines warning, caution, note, and example terms used in the manual.
Lists critical safety warnings regarding unit operation and temperature hazards.
Outlines essential precautions for safe operation and handling of the equipment.
Itemizes all components included in the product package for user verification.
Details the primary functionalities and design benefits of the rework station.
Presents detailed technical data including model, voltage, power, dimensions, and performance metrics.
Guides on attaching the heat gun holder to the main unit for proper setup.
Instructions for securely fitting the hot air nozzle onto the heat gun.
Steps for connecting the power plug and turning the unit on safely and correctly.
Step-by-step guide for desoldering and removing surface-mount components using hot air.
Procedures for applying solder paste and placing new SMD components onto the PCB.
Instructions for setting up the soldering iron stand with the cleaning sponge.
Details on connecting the soldering iron cable to the control station.
Guidance on setting temperature, safe handling, and post-use procedures for the soldering iron.
Essential tips for cleaning, coating, and maintaining soldering iron tips for longevity and performance.
Step-by-step instructions on how to safely replace a blown fuse with a spare.
Identifies common issues, their possible causes, and provides solutions for the rework station.
Advice on contacting the vendor for any problems not covered in the troubleshooting section.
To Next Page