Pro's Pro challenger I User Manual

PRO’S PRO
®
CHALLENGER I
Seite 1 von 5
CHALLENGER
STRINGING MACHINE
MANUAL
Installation & Operation
Table of Contents
1 TABLE OF CONTENTS...........................................................2
2 DESCRIPTION OF PARTS......................................................3
3 ASSEMBLY INSTRUCTION................................................4
4 STRING ING THE FRAME...............................................6
5 CLAMP BASE ADJUSTMENT................................................8
6 PREPARATION OF STRINGING...........................................9

Pro's Pro challenger I Specifications

General

Brand	Pro's Pro
Model	challenger I
Category	Tools
Language	English

Summary

Description of Parts

Assembly Instruction

Steps for assembling the stringing machine, including handling components like the angled support and string clamp.

Stringing the Frame

Instructions on how to properly insert and secure the racquet frame onto the machine's mounting arms.

Clamp Base Adjustment

Fine Adjustment and Fit

Details on adjusting fine-tuning knobs and mounting arm knobs for a snug fit of the frame supports.

Tension Bar and String Gripper

Procedure for setting string tension with the tension bar and securing the string with the clamp and latch.

Preparation of Stringing

Swivel Base Alignment

Guidance on aligning the swivel base ports and using a wrench to adjust tension for the lever.

String Clamp Tension Adjustment

Instructions for adjusting string clamp tension based on string gauge (thin vs. thick) for optimal grip.