EasyManua.ls Logo

pro user DFC 530 - User Manual

pro user DFC 530
36 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Art.-Nr. 16581
Bedienungsanleitung
Intelligentes Ladegerät
DFC 530
Für Blei- und Gel-Batterien mit einer Kapazität von 20Ah – 75Ah
For common lead and gel batteries with a loading capacity of 20Ah -75Ah
Pour batteries gel et batteries au plomb d'une capacité de 20Ah – 75Ah
Para baterías de plomo y gel con una capacidad de 20Ah – 75Ah
Voor lood- en gelaccu's met een capaciteit van 20Ah – 75Ah
Pro olověné a gelové baterie s kapacitou 20Ah – 75Ah
Do akumulatorów ołowiowych i żelowych o pojemności 20Ah – 75Ah
Для свинцовых и гелевых аккумуляторов емкостью 20Ah – 75Ah
Question and Answer IconNeed help?

Do you have a question about the pro user DFC 530 and is the answer not in the manual?

Summary

CONNECTION

Connecting Battery Terminals

Connect positive (RED) and negative (BLACK) clamps to battery terminals ensuring proper contact.

CHARGING

Charging Procedure and Selection

Plug in AC, select voltage/battery type, press START for charging.

Reversed Polarity Handling

Identified by LED/buzzer. Correct connection and reconnect AC plug.

BATTERY ERROR

Battery Error Detection

Detects low/high voltage, short circuit, or wrong voltage selection, stopping charge.

WHEN THE BATTERY IS COMPLETELY CHARGED

Charging Completion and Standby Mode

Indicates 'full' charge and enters floating mode. Charger powers off when AC is disconnected.

IMPORTANT SAFETY INSTRUCTIONS

Gases and Ventilation Precautions

Charge in well-ventilated areas away from ignition sources due to gas release.

Battery and Charger Usage Guidelines

Use specified batteries only. Keep charger dry and for indoor use.

Danger: Handling Risks

Avoid electrolyte burns, thawing frozen batteries, touching clamps, and use qualified repair for damage.

Summary

CONNECTION

Connecting Battery Terminals

Connect positive (RED) and negative (BLACK) clamps to battery terminals ensuring proper contact.

CHARGING

Charging Procedure and Selection

Plug in AC, select voltage/battery type, press START for charging.

Reversed Polarity Handling

Identified by LED/buzzer. Correct connection and reconnect AC plug.

BATTERY ERROR

Battery Error Detection

Detects low/high voltage, short circuit, or wrong voltage selection, stopping charge.

WHEN THE BATTERY IS COMPLETELY CHARGED

Charging Completion and Standby Mode

Indicates 'full' charge and enters floating mode. Charger powers off when AC is disconnected.

IMPORTANT SAFETY INSTRUCTIONS

Gases and Ventilation Precautions

Charge in well-ventilated areas away from ignition sources due to gas release.

Battery and Charger Usage Guidelines

Use specified batteries only. Keep charger dry and for indoor use.

Danger: Handling Risks

Avoid electrolyte burns, thawing frozen batteries, touching clamps, and use qualified repair for damage.

pro user DFC 530 Specifications

General IconGeneral
Brandpro user
ModelDFC 530
CategoryBattery Charger
LanguageEnglish

Related product manuals