To Next PageTo Next Page
Need help?Do you have a question about the pro user DRC4321 and is the answer not in the manual?
The Pro-User DRC4320 is a digital wireless back-up camera system designed to enhance visibility behind a vehicle. It is suitable for use with cars, campers, trailers, trucks, or mini-vans. The system is manufactured by Pro User and is designed to be free from interference from other electronic devices such as Bluetooth, cell phones, Wi-Fi routers, power lines, and various electrical equipment.
The DRC4320 system consists of a digital wireless back-up camera and a monitor with a built-in transmitter box. The camera captures video footage behind the vehicle, which is then wirelessly transmitted to the monitor for display. This allows the driver to see objects and distances behind the vehicle, aiding in safer reversing and parking maneuvers. The system supports up to two cameras, and users can switch between camera views. It also features optional distance guidelines on the display to help estimate the distance to objects.
The product is R&TTE approved (CE0560) and complies with E24 10R-041153 regulations, indicating its suitability for operation in EU countries.
The camera is typically mounted near the license plate, using a supplied mounting plate that can be fixed behind the license plate. The camera's angle is manually adjustable in the vertical direction. For vehicles where license plate mounting is not feasible, alternative mounting locations at the rear of the car may be used. The camera's power cable needs to be routed through the vehicle's body to the reverse light circuit. This involves splicing the red wire of the camera power cable to the reverse light's positive (+) wire and the black wire to the reverse light's negative (-) wire or ground. It is crucial to ensure no vehicle components are damaged during drilling and to use the supplied grommet to protect the cable. The monitor is mounted using a suction cup on a smooth surface inside the vehicle, ensuring it does not obstruct the driver's vision. The mounting arms are adjustable to suit the desired viewing angle. The monitor's power cable connects to the vehicle's 12V/24V cigarette lighter socket. For optimal suction mount effectiveness, installation should be performed at temperatures between 21 and 38 degrees Celsius, avoiding temperatures below 10 degrees Celsius and direct sunlight.
The system features five control buttons: Menu, Arrow (up/down), Power, and Guideline.
After installation, the system should be tested by reattaching the negative battery cable, turning the ignition key to the accessory position (without starting the vehicle), engaging the parking brake, and putting the shifter in reverse. Once satisfied with the cabling, all wires should be permanently routed behind interior panels or under carpeting and secured with cable ties.
General| Brand | pro user |
|---|---|
| Model | DRC4321 |
| Category | Dash Cameras |
| Language | English |
