Pro T705 - Programming Your Thermostat; Setting the Current Time; Configuring Program Schedule (Weekday)

Programming The Thermostat
1. With system switch set to OFF, press the MENU button
2. Press SET TIME
3. Day of the week will be ashing. Use the or key
to select the current day of the week.
4. Press NEXT STEP
5. The current hour is ashing. Use the or key to
select the current hour. When using 12-hour time, make
sure the correct a.m. or p.m. choice is selected.
6. Press NEXT STEP
7. Minutes are now ashing. Use the or key to
select current minutes.
8. Press DONE when completed.
Set Time
1. Select HEAT or COOL with the system switch. Note: You
have to program heat and cool each seperately.
2. Press the MENU button
3. Press SET SCHED. Note: Monday-Friday is displayed and the
WAKE icon is shown. You are now programming the wake
time period for the weekday setting.
4. Time is ashing. Use the or key to make your
time selection for the weekday WAKE time period.
5. Press NEXT STEP
6. The setpoint temperature is ashing. Use the or
key to make your setpoint selection for the weekday
wake period.
7. Press NEXT STEP
8. Repeat steps 4 thru 7 for weekday LEAVE time period, for
weekday RETURN time period, and for weekday SLEEP
time period.
To customize your program schedule, follow these steps
Weekday:
Set Program Schedule
Programming The Thermostat
Continued on next page...