Pro1 IAQ T701i - Thermostat Operation; LCD Display; Glow in the Dark Light Button; Temperature Setpoint Buttons

3
Thermostat OperationThermostat Operation
LCD Display
Glow in the Dark Light Button
Temperature Setpoint Buttons
2
Fan/ User Button
System/ User Button
LCD Display
Glow in the Dark Light Button
Temperature Setpoint Buttons
Fan Button:
System Button:
See page 2 for details about
display and read out icons.
The glow in the dark light
button will self illuminate
for several hours after
exposure to ambient light.
This button turns on the
display light when pressed.
Press the + or - buttons to
select the desired room
temperature.
Select ON or AUTO. ON will
run the fan continuously.
AUTO will run the fan only
when the heating or
cooling system is on.
Note: Some systems may have fan
control disabled.
Select the operation mode
of your HVAC system.
Selecting HEAT will put
your system in heating
mode. Selecting COOL will
put your system in air
conditioning mode.
Selecting OFF turns the
system o.
Set At