Thermostat Quick ReferenceThermostat Quick Reference
Temporary and Permanent Hold Feature Filter Change Reminder
If your HVAC contractor has congured the thermostat to
remind you when the air lter needs to be changed, you will see
FILT in the display when your air lter needs to be changed.
Resetting the lter change reminder: When FILT reminder is
displayed, you should change your air lter and reset the reminder
by holding down the second button from the top left side of the
thermostat for 3 seconds.
Hold down 3 seconds,
to reset lter reminder.
When cool or heat is turned on, the thermostat will display HOLD
and RUN SCHED on the left of your screen when you press the
or button.
Temporary Hold: At this time if you do nothing, the temperature will
remain at this setpoint until next scheduled time period.
Permanent Hold: If you press the HOLD key on the left of your
screen, you will see HOLD appear below the setpoint temperature in
the display. The thermostat will now permanently stay at this
setpoint and can be adjusted using the or keys.
To Return to Running Schedule: Press the RUN SCHED button on
the left of your screen to exit either temporary or permanent hold.
ON AUTO COOL OFF HEAT
To Next Page
Loading...
