Pro1 IAQ T715 Installation Manual

A
trained, experienced technician
must install this product.
Carefully read these instructions. You
could damage this product or cause a
hazardous condition if you fail to follow
these instructions.
Una version en espanol de este
manual se puede descargar en la
pagina web de la compania.
INSTALLATION MANUAL
PR(
1
)
T715
Prot Technologies, Inc.
1111
S. Glenstone Ave., Suite 2-100
Springfield, MO 65804
Toll-Free:
888-776-1427
Web:
www.proliaq.com
Hours of Operation:
M-F 9AM - 6PM Eastern
Thermostat Applications Guide
Description
Gas or Oil Heat
Yes
Electric Furnace
Yes
Heat Pump (No Aux. or Emergency Heat)
Yes
Heat Pump (with Aux. or Emergency Heat)
No
Multi-stage Systems
Yes
Heat Only Systems
Yes
Heat Only Systems - Floor or Wall Furnaces
Yes
Cool Only Systems
Yes
Millivolt
Yes
Power Type
Battery Power
Hardwire (Common Wire)
Hardwire (Common Wire) with Battery Backup
Table of Contents
Page
Installation Tips
2
Thermostat Quick Reference
Subbase Installation
4
Wiring
5
-
6
Technician Setup
7
Technician Setup Menu
8-9
Mounting and Battery Installation
10
Programming The Thermostat
11
Programming The Thermostat (cont)
12
Specifications
13
® U.S. Registered Trademark. Patents pending.
Copyright © 2013. All rights reserved.

Rev. 1318

Pro1 IAQ T715 Specifications

Operating Environment

display temperature range	41°F to 95°F (5°C to 35°C)
control temperature range	44°F to 90°F (7°C to 32°C)
operating ambient temperature	32° to +105° (0° to +41°C)
operating humidity	90% non-condensing maximum

Power

load rating per terminal	1 amp
load rating maximum all terminals combined	1.5 amp
power source voltage	18 to 30 VAC, NEC Class II, 50/60 Hz
battery type	2 AA Alkaline Batteries

Display

display accuracy	± 1°F
heating swing (cycle rate or differential)	0.2°F to 2.0°F
cooling swing (cycle rate or differential)	0.2°F to 2.0°F

Weight and Dimensions

width	4.7"
height	4.4"
depth	0.8"