3
Thermostat OperationThermostat Operation
2
LCD Display
Glow in the Dark Light Button
Temperature Setpoint Buttons
Fan Button:
System Button:
See page 2 for details about
display and read out icons.
The glow in the dark light
button will self illuminate
for several hours after
exposure to ambient light.
This button turns on the
display light when pressed.
Press the + or - buttons to
select the desired room
temperature.
Select ON or AUTO. ON will
run the fan continuously.
AUTO will run the fan only
when the heating or
cooling system is on.
Note: Some systems may have fan
control disabled.
Selects the operation mode
on your HVAC system.
Selecting HEAT turns on
the heat mode. Selecting
COOL turns on the cool
mode. Selecting OFF turns
both heating and cooling
o. Selecting EmH (for heat
pumps with auxiliary heat)
will lockout the compressor
and control emergency/
auxiliary heat.
LCD Display
Glow in the Dark Light Button
Temperature Setpoint Buttons
Fan/ User Button
System/ User Button
Set At
To Next Page
Loading...
