Pro1 IAQ T755H - Setting the Humidity; Target Humidity Setpoint Adjustment; Ambient Humidity Display and Recommendations

10
SETTING THE HUMIDITY
Setting Target Humidity Setpoint
Ambient Humidity Display
Recommended Heating Settings:
Recommended Cooling Settings:
Follow the steps below to change your
target humidity setpoint.
Press the HUMIDITY key
Use the or key to select the
target humidity setpoint.
Press DONE when completed
The target humidity setpoint is not programmable. Unlike
temperature, humidity does not change quickly and should
not be programmed.
Humidity is only energized during heat.
Dehumidify is only energized during cool.
Heat and Cool each have their own target setpoints.
+20º and above
+10º
0º
-10º
-20º
HUMIDITY KEY
AMBIENT HUMIDITY
DAY AND TIME HON (Humidify Energzied) dON (de-humidify Energzied)
TARGET HUMIDITY
SETPOINT KEYS
Ambient humidity will flash opposite of the day and time, and HON if HEAT and FAN is energized at the same time.
Ambient humidity will flash opposite of
the day and time, and dON if COOL and FAN is energized at the same time.
Consult your professional HVAC technician for recommended settings for your climate.
The table on the right shows
recommended indoor humidity levels in
relation to outdoor temperatures during
heating (adding humidity).
Increasing Humidity
Outside
Temperature (0°F)
Recommended
Relative Humidity
35% to 40%
30%
25%
20%
15%
Note: