1
Instruction
Main features
﹡ Welding positioned is normally used in the rotating and welding of the pipe or round
work pieces.
﹡ It can be applied on all kinds of welding: SMAW, MIG, TIG, Plasma, etc.
﹡ It can adopt different fixture to get the welding effects you require.
﹡ The table can be tilted for 0~135°, which is convenient for all angles of the pipe
welding or for adjusting welding angles. (It can adopt either manual or electrical
operation.)
﹡ The table has a through hole of φ 1”, which is convenient for the long pipe welding
or the purge shielding gas.
﹡ On the table, there are 4 slots, suitable for all kinds of grippers.
﹡ Farthing current: 800amps 100%.
﹡ All units are high frequency protected.
To Next Page
