4
2
1) Burns and injury
- Do not touch the hot surface, handle, or pipes.
- Be cautious about injuries from the moving part include bearings and motors.
2) Fire
- Do not put any foreign objects in the machine
- Do not place any unnecessary flammable material, cloth, paper, or other
accessories near the machine
- Do not repair or disassemble the machine while you are operating the machine.
(shut off electricity and gas supply for maintenance or cleaning )
3) Electricity and gas
- Do not touch the power cable with wet hands to prevent from electric shock
- Make sure that you keep power cable and gas hose away from the hot surface of
the machine.
- Close the gas valve, switch off the power at the back and unplug the power cord
after finishing the operation
- Check gas leakage regularly with soapy water before and after use
4) Cleaning and general care
-Avoid the environment with high humidity. Always follow the disassembling or
cleaning process in the manual. Clean the machine regularly to ensure trouble –
free functioning.
5) Damages
Warranty is not valid damages caused by the followings:
- Inappropriate use
- Damage caused by self disassembly, repair, manipulation
- Use of the wrong voltage or gas pressure
- Breakdown from insufficient cleaning and general care
* Taehwan Automation IND is not be responsible for damages caused by the
result of not following safety regulations
(1) General Safety Regulations
To Next Page
Loading...