5
2
(2)-1 Safety mark
(2)-2 Safety device
1) Safety gear cover : the safety cover is attached for user’s safety against the moving
pulley and bearings
- Put the gear cover down before you start the operation
- Make sure that the machine is cooled down before you open and perform maintenance
1) Electric Shock
Turn off the power to avoid any electric
shock or burns before using
2) Moving parts
This label is to warn of its moving parts. Use
the safety cover to avoid any injuries. Always
turn off the power before starting any
Maintenance
3) Burns
This label is to warn possible burns. Do not
touch the hot surface of the machine
4) Fire hazard
This label is to warn of Fire hazard. Especially,
watch out for short circuit or gas leakage,
and flammable objects near the product
To Next Page
Loading...