EasyManua.ls Logo

Proaster THCR-03 - Safety Systems Overview; Safety Systems and Alarms; Installation - Handling; Carriage and Packaging Instructions

Proaster THCR-03
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
2) Emergency Stop Switch
- This button is used to prevent exposure to heat and electricity in case of emergency
- Do not stop the drum or blower when the machine is overheated. Doing so may
cause a fire or breakdown (turn off the gas supply with gas knob only)
3) Anti-Overheating device
- Once roasting temperature reaches the preset temperature, the gas supply is cut off
to avoid overheating automatically
- Do not adjust or reset the temperature above the originally pre-programmed
temperature.
4) Overflowing voltage protection system
- Power shuts off in the event of electrical malfunctions (short circuit, etc.)
5) Fire extinguishing safety system : safety device prevents overheating and
automatically shuts off gas when the power gets cut off
6) Gas Alarm*: You must install the gas leakage alarm by contacting your gas
company
3
1) Package
- For exported machines : Remove nails from the wooden container and take out
slats and boards. Please recycle packaging materials in accordance with your
country’s regulations.
- Please confirm that the roaster unit, filter cyclone, instruction manual, and tool kit
have been included.
2) How to carry
- Weight: about 200 kg
- Method: use a forklift
- Otherwise, six people may move it using a belt sling
- Be careful when placing machine on table. Be sure to keep a close, firm hold on the
bottom part of the machine.
(1) Carriage
6