1) Installation
- The machine is for indoor use. (using outdoor can cause troubles or roasting failure)
- Make sure that you install the machine where has a good ventilation system.
- Poor ventilation can affect quality and evenness of roasting.
- Table: must be able to bear the listed weight. Use a table with wheels for
convenience when cleaning.
- Exhaust: exhaust condition (length of vent pipe, moisture etc.) can affect roasting
results.
- For your safety and optimal roasting, do not place the machine any closer than
20cm from a wall or window. Avoid moisture (do not install the machine near a sink,
espresso machine, etc.)
7
3
1) Preparation
1)-1 Electricity
This machine is designed to be connected to a standard wall socket
Install regarding your country’s voltage system
* Use the transformer as needed.
1)-2 Gas pressure
The machine was manufactured using low pressure gas. Install according to the
requirements of your gas system. Use gas leakage alarm for your safety
1)-3 Ventilation
For the best roasting condition, make the exhaust pipe as short as possible.
In case of using ventilation duct, adjust exhaust strength with the extra damper.
(2) Preparation for installation
(3) Installation
To Next Page
Loading...