Probasics HBFEBED - Maintenance and Safety Checks; Periodic Technician Checks; Electronics Checks; Bed Frame and Surface Inspection

15
HEAD/FOOT BOARD
OPTIONAL HEIGHT ADJUSTMENT
To be performed once per year or between placements by a qualied
technician.
Electronics
Check all controls to make sure all functions work properly.
• Power cord
• Pendant cord
• Check to make sure all wires are routed and attached properly
so they do not interfere with any moving parts.
• Check to make sure all plugs are fully inserted or attached.
• Replace 9V battery annually or after each use.
Bed Frame and Sleeping Surface
Visually check all welds
• Head section
• Knee section
• Main Frame
• Check joints between sleeping surface sections for
loose fasteners.
Cleaning
The metal parts of the bed are covered with a baked epoxy
coating. Clean all coated parts with mild detergent and warm water.
Periodically raise head and feet sections of the bed and remove
dust from frame. Also, periodically remove the mattress and clean
mattress deck. Perform cleaning as needed or between placements.
Lubrication and Mechanical
• Lightly grease all actuator screw threads with white lithium grease.
• Lubricate all caster roller and swivel bearings with light machine oil.
• Check all bolts and tighten as needed.
MAINTENANCE AND SAFETY CHECKS
87.5”
36”
21.5”
15.5”