ProBreeze PB-12 User Manual (English)

Questions and Answers:

E
Eric WrightAug 4, 2025
Why is my ProBreeze PB-12 Humidifier making a loud noise?
- D
  Dr. Erica DavisAug 4, 2025
  If your ProBreeze Humidifier is making unusual or loud noises, it could be due to a few reasons. First, ensure that the water tank is filled with cold or room temperature water; distilled water is recommended for best results. Also, check that the water tank is correctly aligned and securely positioned on the base. Another possible reason - the appliance is not level. Place the appliance on a level surface.
M
murphycarolineAug 10, 2025
Why is no mist coming out of my ProBreeze Humidifier?
- D
  deniseduncanAug 10, 2025
  If your ProBreeze Humidifier isn't producing mist, there might be a few reasons. First, ensure the humidifier is plugged into a working power socket and turned on using the power button. Also, check the water tank; if it's empty, fill it with cold or room temperature water. For optimal performance, distilled water is recommended.
A
Alan CampbellAug 16, 2025
What to do if my ProBreeze PB-12 is leaking water?
- C
  Cameron BeckerAug 17, 2025
  If your ProBreeze Humidifier is leaking, check the silicone ring within the water tank cap. Make sure it's correctly positioned. Also, ensure the water tank cap is tightly secured.
K
Kristen OrrAug 22, 2025
How to prevent white dust from my ProBreeze Humidifier?
- S
  Sandra MathewsAug 22, 2025
  If you notice white dust (limescale) around or inside your ProBreeze Humidifier, it's likely due to high mineral content in your water. To resolve this, switch to distilled, purified, or filtered water. Regularly clean the appliance to prevent build-up.
K
Kellie PerkinsAug 28, 2025
What to do if there is water around my ProBreeze Humidifier?
- D
  Douglas GoodwinAug 28, 2025
  If there's a pool of water around your ProBreeze Humidifier, it's likely due to spillage during filling or placement of the water tank. Use a dry, soft cloth to absorb any excess water when filling the tank and placing it on the base.