12 of 88 | English
EMPTYING THE WATER TANK
――
CAUTION: ALWAYS TURN THE UNIT OFF AND REMOVE THE PLUG FROM THE WALL OUTLET
BEFORE REMOVING THE WATER TANK.
The water tank should be emptied after every use. To empty the water tank:
1. Turn off the appliance and unplug it from the power socket.
2. Turn the water tank locking clip clockwise 90 degrees and gently pull the water tank out
until it stops.
3. Turn the water pump locking clip clockwise 90 degrees, detach the water pump from its
tting, and remove the water tank.
4. Empty the water tank and dry with a soft cloth.
5. Slot the water tank back into position and attach the water pump to its tting turning the
water pump locking clip counterclockwise 90 degrees to fully secure.
6. Push the water tank back in fully and turn the water tank locking clip counterclockwise 90
degrees to fully secure.
CLEANING AND STORAGE
――
WARNING: ENSURE THE APPLIANCE IS SWITCHED OFF
AND UNPLUGGED FROM THE ELECTRICAL OUTLET BEFORE
HANDLING, FILLING WITH WATER OR CLEANING THE
APPLIANCE.
CAUTION: DO NOT ALLOW WATER OR OTHER LIQUIDS TO
RUN INTO THE INTERIOR OF THE APPLIANCE, AS THIS COULD
CREATE A FIRE AND/OR ELECTRICAL HAZARD.
CAUTION: DO NOT USE ANY ABRASIVE CLEANERS OR
SOLVENTS, AS THIS CAN DAMAGE THE APPLIANCE.
• Do not attempt to clean the appliance in any other way
than that detailed by the manufacturer.
• Cleaning and user maintenance shall not be made by
children.
• Clean the vents and openings of the appliance regularly
with a vacuum cleaner, using the brush attachment to
avoid any dust build-up.
• Empty and clean the appliance before storage. Clean the
To Next Page
Loading...
Need help?
General
