Why is my ProBreeze Air Conditioner not collecting enough water?
If your ProBreeze Air Conditioner isn't collecting enough water, it could be because the surrounding air is too cold, which reduces its effectiveness. For optimal dehumidifying, use it in warm, humid temperatures.
Why is my ProBreeze Air Conditioner not cooling effectively?
If your ProBreeze Air Conditioner isn't cooling effectively, consider these factors: * **Open doors and windows:** Close all doors and windows, using seals if necessary, to prevent heat from entering. Remove any other heat sources from the room. * **Exhaust hose issues:** Ensure the unit is close to a window or door and that the exhaust hose is properly sealed to the outside to prevent warm air from re-entering. * **Blocked filters:** Clean the filters according to the provided instructions. * **Clogged air inlets/outlets:** Inspect the air inlets and outlets for any obstructions and clean them.
Why is my ProBreeze PB-AC01 so noisy?
Air conditioners naturally produce noise as they circulate refrigerant to cool the air. To minimize noise, ensure your ProBreeze Air Conditioner is placed on a flat, secure surface.
What to do if ProBreeze Air Conditioner displays E2?
If your ProBreeze Air Conditioner displays 'E2', it means there is a room temperature sensor failure. Arrange for a professional to check the room temperature sensor and related circuits.
What to do if ProBreeze PB-AC01 Air Conditioner displays E1?
If your ProBreeze Air Conditioner displays 'E1', it indicates a pipe temperature sensor failure. Arrange for a professional to check the pipe temperature sensor and related circuits.
What does E4 mean on my ProBreeze Air Conditioner?
The 'E4' error code on your ProBreeze Air Conditioner indicates that the anti-frost protection is active. The appliance will automatically return to its set operating settings once the internal pipe temperature exceeds 8°C (46.4°F).
What to do if ProBreeze Air Conditioner displays E4?
If your ProBreeze Air Conditioner displays 'E4', it indicates anti-frost protection is active. The appliance will automatically resume operating at your chosen settings once the internal pipe temperature exceeds 8°C (46.4°F).
General| Type | Portable Air Conditioner |
|---|---|
| Cooling Capacity | 9000 BTU |
| Noise Level | 52 dB |
| Refrigerant | R290 |
| Timer | 24 hours |
| Energy Efficiency Ratio (EER) | 2.6 |
| Power Supply | 220-240 V, 50 Hz |
| Features | Remote Control, LED Display |
| Modes | Cooling, Fan, Dehumidifier |
| Fan Speed | 3 speeds |
Explanation of the functions of buttons and the digital display on the control panel.
Description of indicator lights and their meanings on the control panel.
Details on the remote control, its buttons, and battery requirements.
Step-by-step guide for installing the C-shaped buckle.
Instructions for assembling and connecting the exhaust hose short connector.
Detailed steps for connecting the main heat exhaust hose.
Guide for installing the sealing board for sliding windows.
To Next Page
