Drain cap
Drain plug
Water outlet
Turn off the appliance and unplug it from
the wall socket.
Place a shallow tray underneath the water
outlet.
Unscrew the drain cap, unplug the drain
plug and allow the water to collect in the
shallow tray.
To fully empty the water tank gently tilt
the appliance back on its rear wheels. Do
not tilt more than 30 degrees.
Once empty, return the appliance to a
fully upright position and replace the drain
plug and cap.
Empty the shallow tray.
When the water tank is full 10 beeps will
sound; the water tank full indicator light
will illuminate, and the appliance will
pause operation to prevent the water tank
from overflowing.
To empty the water tank:
Note: If the shallow tray is not large
enough to hold all of the water from the
appliance replace the drain cap to prevent
water from flowing onto the floor. Empty
the shallow tray and continue from step 2.
1.
2.
3.
4.
5.
6.
3
4
30º
English | 04English | 12
Emptying the Water Tank
Shallow tray
2
To Next Page
Loading...
Need help?
General
