Clean the appliances evaporator and
condenser filter once every two weeks.
To access the filters:
Filter cleaning
1.
2.
3.
Gripping position
Filter
1
2
English | 04English | 14
Storage
Grip the evaporator and condenser filters
at the gripping position and gently
remove.
Use a firm brush and/or vacuum cleaner
to clean the filters of any dust and
particles.
Return the evaporator and condenser
filters.
For long-term storage:
1.
2.
3.
4.
Empty the water tank and leave the drain
cap and drain plug off.
Run the appliance in fan-only mode on the
low fan speed setting for 12 hours to allow
the interior of the appliance to fully dry.
Turn off the appliance, replace the drain
plug and drain cap, and unplug the power
cord and wrap it around the power cord
tidy.
Remove the heat exhaust hose.
5.
6.
Remove the batteries from the remote
control.
Cover the appliance and all accessories with
a waterproof covering and store in a safe,
dry place, out of the reach of children.
To Next Page
Loading...
Need help?
General
